English
33
SR4373SD-USB_IM_new2
17.05.16
• You’d like to be woken up by radio? Set the desired
station in advance.
• Once the alarm time has been reached, the symbol
for the fi rst or second alarm time will fl ash. The volume
increases gradually to the max. volume.
Setting the Alarm Time
1. Switch the device off.
2. Press the button for approx. 3 seconds. The hours
start fl ashing.
3. Set the hour with the buttons
/ .
4. Confi rm the setting with the button.
5. Repeat steps 3 and 4 to set the minutes.
6. Use the
button to select how you want to be woken
up. Choose one of the following settings:
bu
= You are woken up with a beep.
USB CARD
= Insert the storage medium from which
music is to be played. When no storage
medium is inserted, you are woken up
automatically with the beep.
FM
= You are woken up with the station
received last.
7. Confi rm your selection with the button . The alarm
time is stored. The symbol shows in the display.
Proceed as described above to set the second alarm time.
Always use the button.
Switching off the Alarm Signal
Press the button or the button to switch off the
alarm until the next day.
Snooze Function (SNOOZE)
The automatically set alarm signal can be switched off
with the button for app. 9 minutes. The display shows
“
SNOOZE
“.
Activating / Deactivating the Alarm Time
Press the or the button repeatedly.
With activated alarm, the corresponding symbol “ ” or “ ”
lights in the display.
Delayed Shut-Off
You want to fall asleep with radio or MP3 music?
1. Press the button. The display shows (minutes).
2. Press the button repeatedly to reduce the time in
steps of 10 minutes.
• The display “SLEEP” shows the activated function.
• The setting “ ” deactivates the function.
AUX IN socket
For connecting to external players, e.g. MP3 player, smart-
phone, tablet PC etc.
1. Please connect the external device with a 3.5 mm stereo
jack plug to the AUX IN socket.
2. Start the playback of your audio source. You will hear the
sound playback from the external device through the
loudspeakers. Use the / buttons to adjust the
volume. The control buttons are not operational.
3. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.
Cleaning and Maintenance
CAUTION:
Do
not
immerse the device in water.
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms
Course
Solution
Music play-
back from USB
and memory
cards is inter-
rupted.
The MP3 fi le is
damaged.
Make sure that the
MP3 fi le is OK.
Batteries too
weak.
Insert new batteries
or operate the device
with the mains lead.
Device cannot
be operated.
Device crashes
and “hangs”.
Disconnect the power
supply for 5 seconds.
Then switch the
device on again.
Technical Data
Model: ...................................................................SR 4373 SD / USB
Power supply: ................................................100 − 240 V, 50 / 60 Hz
Battery operation: ..................................4 x 1.5 V, Type UM 2 / R 14
Power consumption:.................................................................10 W
Protection class: ..............................................................................
Ⅱ
Net weight: .............................................................. approx. 0.53 kg
Supported music fi le format: ...................................................MP3
Radio section:
Frequency ranges: ................................FM 87.5 ~ 108.0 MHz
The right to make technical and design modifi cations in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Summary of Contents for SR 4373 SD/USB
Page 45: ......
