AEG SR 4352 CD/MP3 Instruction Manual Download

Page: 7 / 32

English

Press twice =

(The symbol

is lit) the whole CD is

played continuously.

Press three times = (RDM appears in the display) all titles are

replayed successively in random order.

Press four times = (INTRO appears in the display) every title

of the CD is played for 10 seconds each.

Press five times = All functions are cancelled. The normal

play mode is resumed.

Only when playing CD’s in MP3 format:

Press once =

(The symbol

flashes) the current track

is repeated continuously.

Press twice =

The selected folder of the MP3 CD is
repeated continuously (

FOLDER

appears in the display).

Press three times = (The symbol

is lit) the whole CD is

played continuously.

Press four times = (RDM appears in the display) All titles are

replayed successively in random order.

Press five times = The function is deactivated and the CD is

played in the normal mode.

FOLD+/+10 and FOLD-/-10 (10/14)

(only with MP3 CD’s)

• Press this button during playback to skip forward, or back

by 10 titles each (if more than 10 titles are stored on a
CD).

• Keep the button pressed down to select the next or

previous folder (if the CD contains several folders).

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the STOP button (16).
2. Press the “PROG./P-MODE” button (12). “P01” (preset

location) appears on the display and PROG flashes on
the display. Use the NEXT/ BACK buttons (9/15)
to select the desired track and then press the “PROG./
P-MODE” button again. The display changes to memory
slot P02.

3. Select the next track with the

NEXT/ BACK button

and press the “PROG./P-MODE” button again. Repeat
the procedure until all the desired tracks are selected.

NOTE:

Once the storage capacity of the tracks to be pro-
grammed has been reached “FUL” flashes in the
display.

4. Press the

/ button (8). The playback starts. The first

selected track number is shown on the display, the mes-
sage “CD “ or “MP3 “ and PROG is shown on the
display.

5. Press once the STOP button to stop the playback while

retaining the program.

6. To play the programme back again, press the

button.

7. To delete the program, press the STOP button twice.

The PROG control lamp goes out.

The device stops automatically after all the programmed
titles have been played back. The PROG display will go out
and the programmed sequence will be deleted from the
memory.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.

This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under “Playing
CDs/MP3”. Tracks can be programmed as described under
“Playing Back Programmed Tracks”.

Please note:

There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.

Furthermore, the music industry does not adhere to fixed

standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is

not

a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the

machine.

• Any marks on the surface can be wiped off with a slightly

damp cloth without any additives.

Troubleshooting