AEG SNMP Ext, Quick Start Manual

Page: 5 / 32

1.
Choose the entry
- System
- Network
at the drop-down menu on the left side.
2.
Enter the values for
- Local Address
- Subnet Mask
- Default Gateway
("DNS-Server", if desired)
3.
Press the button “ Apply ” to commit the changes.
4.
Choose the entry
- Services
- Timeserver
in the drop-down menu.
5.
Enter the „ IP Address “ of your timeserver and
synchronize the SNMP Adapter with this server.
The timeserver settings are important for the event- /
alarm logging. (If no timeserver is configured the time
will be set to 01.01.2000 00:00).
6.
The changes of each configuration page have to
commit by pressing the button “ Apply ”.
7.
Choose the point
- Devices
- UPS
- Setup
in the drop-down menu for the UPS configuration.
8.
Choose the „ UPS Model “, which is connected to
the SNMP Adapter.
9.
Click on the button “ Apply ” to save the changes.
More Information about the UPS settings are
available in the SNMP Adapter User Manual.
7. Configure the IP address of the SNMP Adapter
Basic Network Settings
English