1.7
Environment Protection
This appliance does not contain
gasses which could damage the
ozone layer, in either its refriger-
ant circuit or insulation materials.
The appliance shall not be dis-
carded together with the urban
refuse and rubbish. The insula-
tion foam contains flammable
gases: the appliance shall be dis-
posed according to the applica-
ble regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, espe-
cially at the rear near the heat ex-
changer. The materials used on
this appliance marked by the
symbol
are recyclable.
2.
CONTROL PANEL
1
2
4
3
1
Temperature indicator LED
2
Intensive Cooling indicator
3
Intensive Cooling button
4
Temperature regulator
ON/OFF button
2.1
Switching on
Insert the plug into the wall socket.
Touch the temperature regulator button
if all LED are off.
2.2
Switching off
Keep touching the temperature regula-
tor button for 3 Sec.
All indicators light off.
2.3
Temperature regulation
To operate the appliance, proceed as
follows:
• touch the temperature regulator but-
ton until the LED corresponding to the
required temperature lights up. Selec-
tion is progressive, varying from 2 to
8°C.
At first button touch actual setting
LED keeps blinking.
Any time the button is touch the set
temperature is moved to 1 position
right. Corresponding LED will blink for
a while.
Touch the setting button until the re-
quired temperature is selected. The
set will be fixed
coldest setting: +2°C
warmest setting: +8°C
A medium setting is generally
the most suitable.
However, the exact setting should be
chosen keeping in mind that the temper-
ature inside the appliance depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
ENGLISH
5
