background image

It is possible to change the time during
the countdown and at the end by press-
ing the Temperature colder button and
the Temperature warmer button.

2.10 

Child Lock function

To lock the buttons from unintentional
operation select the Child Lock function.
To switch on the function:

1.

Press the Mode button until the cor-
responding icon appears.

2.

The Child Lock indicator flashes.

3.

Press the OK button to confirm.
The Child Lock indicator is shown.

To switch off the function:

1.

Press the Mode button until the
Child Lock indicator flashes.

2.

Press the OK button to confirm.

3.

The Child Lock indicator goes off.

2.11 

High temperature alarm

An increase in the temperature in the
freezer compartment (for example due
to an earlier power failure) is indicated
by:
• flashing the alarm and freezer temper-

ature indicators

• sounding of buzzer.
To reset the alarm:

1.

Press any button.

2.

The buzzer switches off.

3.

The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then
show again the set temperature.

4.

The alarm indicator continue to flash
until the normal conditions are re-
stored.

When the alarm has returned the alarm
indicator goes off.

2.12 

Door open alarm

An acoustic alarm will sound if the door
is left open for a few minutes. The door
open alarm conditions are indicated by:
• flashing Alarm light
• acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing alarm button.

2.13 

COOLMATIC function

If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
To switch on the function:

1.

Press the Mode button until the cor-
responding icon appears.
The COOLMATIC indicator flashes.

2.

Press the OK button to confirm.
The COOLMATIC indicator is
shown.

The COOLMATIC function shuts off au-
tomatically after approximately 6 hours.
To switch off the function before its au-
tomatic end:

1.

Press the Mode button until the
COOLMATIC indicator flashes.

2.

Press the OK button to confirm.

3.

The COOLMATIC indicator goes off.

The function switches off by se-
lecting a different fridge set tem-
perature.

2.14 

FROSTMATIC function

To switch on the function:

1.

Press the Mode button until the cor-
responding icon appears.
The FROSTMATIC indicator flashes.

2.

Press the OK button to confirm.
The FROSTMATIC indicator is
shown.

This function stops automatically after 52
hours.
To switch off the function before its au-
tomatic end:

1.

Press the Mode button until the
FROSTMATIC indicator flashes.

2.

Press the OK button to confirm.

3.

The FROSTMATIC indicator goes
off.

The function switches off by se-
lecting a different freezer set
temperature.

ENGLISH

7

Summary of Contents for SCZ71800F0

























Reviews: