background image

10

Fresh food  refrigeration

To obtain the best performance:

• do not store warm food or evaporating liquid in the refrigeator
• do cover or wrap the food, particularly if it has a strong flavour.
• Position food so that air can circulate freely round it.

Useful hints:

Meat

(all types): wrap in polythene bags and place on the glass shelf above

the vegetable drawer(s). 

For safety, store in this way only one or two days

at the most.

Cooked foods, cold dishes, etc

: these should be covered and may be placed

on any shelf.

Fruit and vegetables:

these should be thoroughly cleaned and placed in the

special drawer(s) provided.

Butter and cheese:

these should be placed in special airtight containers or

wapped in aluminium foil or polythene bags to exclude as much air as pos-
sible.

Milk bottles: 

these should have a cap and should be stored in the bottle

rack on the door.

Bananas, potatoes, onions and garlic, if not packed, must not be kept in
the refrigerator.

Drawer

The drawer is suitable for storing
fruit  and  vegetables.  There  is  a
separator  inside  the  drawer  that
can  be  placed  in  different  posi-
tions to allow for the subdivision
best suited to personal needs.
There is a grille on the bottom of
the  drawer  to  separate  the  fruit
and vegetables from any humidity
that  may  form  on  the  bottom
surface.
To remove the drawer, use the side handles (as shown in the drawing).
All parts inside the drawer can be removed for cleaning purposes.

19

The food is too warm.

Interior lighting does not
work.

The appliance is near a heat
source.

Temperature is not properly
adjusted.

Please look in the "Initial Start
Up" section.

Light bulb is defective.

Please look in the "Changing
the Light Bulb" section.

Turn the temperature regula-
tor to a colder setting tempo-
rarily.

Door was open for an exten-
ded period.

Please look in the "Installation
location" section.

A large quantity of warm food
was placed in the appliance
within the last 24 hours.

Open the door only as long as
necessary.

Malfunction

Possible Cause

Remedy

Appliance does not work.

Appliance is not switched on

Switch on the appliance.

Mains plug is not plugged in
or is loose.

Insert mains plug.

Fuse has blown or is defective.

Check fuse, replace if neces-
sary.

Socket is defective.

Mains malfunctions are to be
corrected by an electrician.

Appliance cools too much.

Temperature is set too cold.

Turn the temperature regula-
tor to a warmer setting tem-
porarily.

What to do if ...

Correcting Malfunctions

A malfunction may only be caused by a minor fault that you can rectify
yourself using the following instructions. Do not perform any other work on
the appliance if the following information does not provide assistance in
your specific case.

Warning!

Repairs to refrigerators/freezers may only be performed by

qualified  service  engineers.  Improper  repairs  can  give  rise  to  significant
hazards for the user. If your appliance needs repairing, please contact your
specialist dealer or your local Service Force Centre.

Heavy build up of frost, possi-
bly also on the door seal.

Door seal is not air tight (pos-
sibly after reversing the door).

Carefully warm the leaking
sections of the door seal with
a hair dryer (not hotter than
approx. 50 °C). At the same
time shape the warmed door
seal by hand such that it sits
correctly.

Summary of Contents for SANTO 70312





























Reviews: