AEG RMB96716CX, User Manual

Page: 8 / 274

8 www.aeg.com
5. INSTALLING YOUR NEW APPLIANCE
This section explains the installation of
the new appliance before using it for the
first time. We recommend reading the
following tips.
WARNING!
For proper installation, this
refrigerator must be placed
on a level surface of hard
material that is the same height
as the rest of the flooring.
This surface should be strong
enough to support a fully loaded
refrigerator, or approximately
250 kg. When moving, be sure to
pull out and push back the unit in
straight.
Class Symbol Ambient
Temperature
rage (°C)
Extend
Temperate
SN +10 to +32
Temperate N +16 to +32
Subtropical ST +16 to +38
Tropical T +16 to +43
Leveling of appliance
For proper leveling and avoid vibration,
this appliance is provided with adjustable
feet in front. Please adjust the level by
following below instructions:
1. Roll the refrigerator into place.
2. Turn the adjustable feet (with your
fingers or a suitable spanner) until
they touch the floor.
3. Tilt back the top backwards for about
10-15 mm by turning the feet 1~2
turn further. This will allow the doors
to selfclose and seal properly.
4. Whenever you want to move the
appliance, remember to turn the feet
back up so that the appliance can roll
freely. Reinstall the appliance when
relocating.
PP
5HDUUROOHU
)URQWUROOHU
$GMXVWDEOHIRRW
WARNING!
The rollers, which are not castors,
should be only used for forward
or backward movement. Moving
the refrigerator sideways may
damage your floor and the rollers.
Adjusting the doors
• Both left and right doors are equipped
with adjustable axes, which are
located in the lower hinges.
• Before adjusting its doors, please
ensure that the refrigerator is level.
Please review the previous section on
“Leveling appliance”. If you find the
top of the doors are uneven, insert the
Allen wrench into the hinge axis, and
turn it clockwise to rise the door or
anticlockwise to lower the door, and
insert an E Ring into the gap.