background image

3.1 

Switching on

1.

Plug the appliance into electrical

mains socket.

2.

To turn on the appliance, touch the

temperature key until all LED

indicators light up.

After approximately 3

seconds LED indicators fade

and the temperature is set

to the default setting (ECO

mode). LED indicator next to

ECO mode icon illuminates.

3.2 

Switching off

1.

To switch off the appliance press the

temperature key for 3 seconds.

All LED indicators turn off.

2.

To disconnect the appliance from the

electrical supply, remove the mains

plug from the power socket.

3.3 

Temperature regulation

To regulate the temperature, press the

temperature key. Every time the key is

pressed, the set temperature moves by 1

position and corresponding LED

indicator lights up. Press the temperature

key repeatedly until the required

temperature is selected. The setting will

be fixed.

Selection is progressive,

varying from +2°C to +8°C.

Coldest setting: +2°C.

Warmest setting: +8°C

Most suitable setting: ECO

mode (+3 to +4°C).

Choose the setting keeping in mind that

the temperature inside the appliance

depends on:

• room temperature

• frequency of opening the door

• quantity of food stored

• appliance location.

3.4 

Sleep mode of the display

After 30 seconds of no interaction with

the appliance, the display goes into the

sleep mode. Only LED indicator

corresponding to currently set

temperature illuminates in low light. All

other LED indicators are off. To

deactivate this mode press the

temperature key.

3.5 

ECO mode

In this mode the temperature is set

b3 and +4°C.

This is the best temperature

to ensure good food

preservation with minimal

energy consumption.

To activate ECO mode press the

temperature key repeatedly until LED

indicator next to ECO mode icon lights

up.

3.6 

FROSTMATIC function

If you need to insert a large amount of

warm food into fridge compartment (for

example after doing the grocery

shopping) or rapidly decrease the

temperature in the freezer compartment

to freeze fresh food quickly, we suggest

activating FROSTMATIC function for

proper food storage.
To activate this function press the

temperature key repeatedly until the LED

indicator next to FROSTMATIC icon

lights up. Also LED indicator

corresponding to +2°C illuminates.

This function stops

automatically after 52 hours.

When the function

deactivates, the previous

temperature setting is

restored.

You can deactivate this

function at any time by

pressing the temperature

key and choosing a new

temperature setting.

This function corresponds

both to fridge and freezer

compartment.

3.7 

Door open indicator

If the door has been left open for

approximately 5 minutes, the door open

indicator activates. The temperature key

www.aeg.com

6

Summary of Contents for RCB53724MW

















Reviews: