28
3-Way call
3.
You can hold a three-way conversation between an external caller and
another handset user.
During an external call, press
1.
Int
. Your caller is put on hold.
Enter the handset number you want to invite.
2.
When the handset answers, press
3.
#/Pause
to connect all three callers.
The
icon is displayed to indicate a 3-way call.
If the other handset does not answer, press
4.
Int
to return to your external caller.
Press
5.
End call
to end the call.
Register a new Pyramid handset to your Pyramid base
4.
Notes: Handset batteries must be fully charged and you must be close to the
base to register.
Handsets that were supplied with your Pyramid base are already registered.
1.
At the base:
Press and hold
Find
for 3 seconds until you hear two beeps.
You now have 90 seconds to register the handset.
At the handset:
2.
press
Menu/OK/Secrecy
, scroll
Down
to
« REGISTER »
and press
Menu/OK/Secrecy
.
Scroll
3.
to
« REG BASE »
and press
Menu/OK/Secrecy
.
Enter the base number (1–4). The numbers flashing are already in use.
4.
The display will show
5.
« SEARCHING...1 »
.
The display will ask for the PIN to be entered. Enter the PIN (the default
6.
setting: 0000) and press
Menu/OK/Secrecy
to confirm. You will hear a
beep. The handset is now registered.
If the base is not found after a few seconds, the handset returns to
standby. Try registering again.
When a handset is registered to a base, it is automatically assigned a number
which is displayed on the handset and must be used for internal calls.
If registration does not work:
Try again selecting a different base number.
.
Make sure there is no other electrical equipment very close by that may
.
interfere with the registration signal.
