4
risk of electric shock
1. Do not remove the casing. Protect PV
®
contains no user serviceable
parts. Refer servicing to qualified service personnel.
Both AC and DC voltage sources are terminated inside the PV-Inverter.
Please disconnect these circuits before servicing.
2. When a photovoltaic panel is exposed to light, it generates a DC
voltage. When connected to this equipment, a photovoltaic panel will
charge the DC link capacitors.
3. Energy stored in this equipment’s DC link capacitors presents a risk
of electric shock. Even after the unit is disconnected from the grid
and photovoltaic panels, high voltages may still exist inside the PV-
Inverter. Do not remove the casing until at least 30 minutes after dis-
connecting all power sources.
4. This unit is designed to feed power to the public power grid (utility)
only. Do not connect this unit to an AC source or generator. Connec-
ting Protect PV
®
to external devices could result in serious damage to
your equipment.
5. Remove the unit carefully from its packaging and inspect for external
damage. If you find any imperfections, please contact your local AEG
PS dealer.
6. Hot surfaces
Although designed to meet all safety requirements, some parts and
surfaces of Protect PV are still hot during operation. To reduce the risk
of injury, do not touch the heat sink at the back of the PV-Inverter or
nearby surfaces while Protect PV is operating.
SaFETy iNSTRuCTiONS
Summary of Contents for Protect PV 2000
Page 31: ...31 ...
