10
4.8
Setting the VOX (voice activated) sensitivity
In VOX mode, the unit will transmit a signal only when it is activated by
your voice or other sounds around you. The unit will transmit further
for 2 seconds even if you stop talking.
The level of VOX sensitivity is shown by a number on the LCD screen.
At the highest level, the units will pickup softer noise (including
background noise); at the lowest level, it will pick up only louder noise.
t
Press the menu button
4 times,
VOX
icon will be displayed and
“OF” flashes on the LCD screen.
t
Press the up button to set the VOX sensitivity into maximum level
(the maximum level is 3.)
t
To deactivate the VOX function, press the down button until “OF”
appears on the LCD screen.
t
Press the PTT button to confirm your setting.
VOX
will steady
appear on the LCD screen as along as the VOX feature is activated.
Note:
VOX operation is not recommended if the unit will be used in a noisy
or windy environment.
4.9
Activating the auto channel scan
Channel scan perform searches for active signals in an endless loop for
all 8 channels, 38 CTCSS codes and all 83 DCS codes.
t
Press the menu button
5
times,
SC
icon will display on LCD
screen.
t
Press the up or down button to begin scanning channels when
an active signal is detected, channel scan pauses on the active
channel.
t
Press the menu button
six times, CTCSS flashes on the LCD
screen press the up or down button to begin scanning the
CTCSS from 1-38.
t
Press the menu button
seven times, DCS flashes on the LCD
screen. Press the up or down button to begin scanning DCS
code 1-83.
t
Press the
PTT
button to confirm your setting.