AEG PDU 10-1, Operating Instructions Manual, Page: 22 / 32

2 Overview
i
P ower D istribution U nits are firstly used to
duplicate connections, secondly for trouble-free
connection of loads with different plug
configurations to non-heating appliance output
sockets acc. to IEC 320. Power distribution units
therefore allow a wide variety of different
appliances to be connected, e.g. PC, workstations,
servers, relatively small telephone systems and
similar loads.
Each of the power distribution units is available in two versions
for connecting to non-heating appliance sockets in acc. with
IEC 320, rated at 10 A and 16 A.
2.1 Principle of Operation
The power distribution units have been designed for
installation in standard 19 inch (482.6 mm) network cubicles,
and can be mechanically attached in a wide range of variants.
The output sockets vary and allow flexible use in a wide range
of applications.
Alternatively, these power distribution units can also be used
as portable socket strips. The mounting brackets on the sides
can be completely removed for this purpose.
22