background image

818 17 78-00/5

19

Switching the Appliance off

0

 

1.

To switch off, press the ON/OFF button until the mains power light 
extinguishes.

Note:

The appliance cannot be switched on or off if unplugged, or if there is 
no power being supplied to it.
Following connection to the mains power supply, the appliance returns 
to the same operating state as before the interruption of main power.

If the appliance is to be removed from service for a lengthy period:

0

 

1.

Switch off the appliance, to do this press the ON/OFF button until the 
mains power light extinguishes.

2.

Remove the mains plug or switch off.

3.

Clean the appliance thoroughly (see section: "Maintenance and Clean-
ing").

4.

Leave door open to avoid accumulation of odours. 

Opening the Door

If the door is closed when the appliance is in operation, it cannot be 
immediately opened again, because a vacuum occurs which holds the 
door closed until pressure has been equalised. The door can be opened 
again after several minutes.

If your appliance is equipped with a 
QUICK door opener - an opening 
mechanism integrated into the door 
handle - the door can be opened 
easily at any time.

Summary of Contents for OKO_SANTO SUPER

































Reviews: