Maintenance and Cleaning
818 17 80-00/1
23
Replacing the Light Bulb
1
Warning!
Danger of electrical shock! Before replacing the light bulb
switch appliance off and disconnect from the electricity supply.
Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14
Important!
When replacing the lamp only fit a
lamp of suitable diameter, that is at
least 18 mm, this will ensure a good
seat on the rubber seal.
Where to purchase: specialist
retailer or AEG Service Force Centre.
0
1.
To switch off the appliance turn the temperature regulator to
position "
•
".
2.
Unplug the mains plug.
3.
To change the light bulb, undo the
cross head screw and remove the
light bulb cover downwards.
4.
Change the defective light bulb.
5.
Refit the light bulb cover and the
cross head screw.
