7
Operating and indicator panel
1
2 3
4
4
3
2
1
0
1 Pilot light (yellow)
2.Ambient button
3 Pilot light (green)
4 Temperature regulator and ON/OFF switch
The temperature regulator (4)
, which serves at the same time as the
applianceÕs On-/Off switch.
The green pilot lamp (3)
, which comes on when the panel is swit-
ched on and the mains voltage is available. In this position, the refri-
gerating unit automatically operates by system control.
Temperature adjustment with ambient temperature below +16¡C
When the ambient temperature in the room in which the appliance is
situated is less than 16¡C, the ambient switch (2) must be depressed.
The yellow pilot light (1) above the switch comes on. In this way, when
the ambient temperature is low, the compressor operates for longer
periods to ensure that the storage temperature of -18¡C is maintained
inside the frezzer compartment.
Important!
If the ambient temperature rises to above +16¡C, de-activate the
ambient switch in order to avoid unnecessary energy consumption.
The yellow pilot light goes out.
Starting up and temperature regulation
¥ Wash the inside of the appliance with luckwarm water with little bicar-
bonate of soda added (5ml to 0.5 litre of water). Do not use soap or
detergent as the smell may linger. Dry the appliance thoroughly.
¥ When the refrigerator compartment door is opened, the internal ligh-
ting is switched on. The temperature selector knob is located on the
top of the appliance.
