24
8mm
PR34
Open both the appliance door and
that of the kitchen unit to approx.
90¡. Place the little plates over the
runners. Hold the doors of the
appliance and the unit together
and mark the holes.
PR35
Remove the little plates and make
the holes with a diam. of 2 mm.
Replace the little platee over the
runners and screw in the screws
provided (3.5x16 mm).
For the alignment of the kitchen
unit door, if necessary, use the
clearance size of the slotted holes.
At the end of the procedure, check
that the doors of the appliance and
the kitchen unit open properly.