Installation and connection instructions
45
Levelling the appliance
3
Self adjusting foot:
The rear foot of your washing machine is designed
like a spring leg. This makes the machine very stable even at high spin
speeds.
If the washing machine is still not stable during spinning, proceed as
follows:
0
1.
Set the three adjustable feet to
the nominal value of 10 mm.
Use the supplied spanner.
If the self adjusting foot does
not reach the floor:
2.
Manually extend the self
adjusting foot (rear left) to
the required length.
3.
Check the appliance is level using
a spirit level.
Important!
Never use strips or
shims of wood or cardboard etc.
to compensate for any uneven-
ness in the floor. Always use
the adjustable feet.
