Operating Instructions
21
Add detergent/care agent
3
For information on detergent and care agents, refer to the section "De-
tergents and care agents".
0
1.
Open the detergent drawer: grip inside
the flap on the drawer at the bottom (1)
and pull out the drawer as far as it will
go (2).
2.
Filling with washing detergent/
care agent.
3.
Push the drawer fully in.
3
If using liquid detergent / tabs
Add liquid detergent / tabs in the amount recommended by the was-
hing detergent industry. Follow the instructions on the washing deter-
gent package.
Compartment for in-wash
stain treatment
Compartment for powder
main detergent
(If you use water softener and require
the right compartment for the pre-
wash/soaking detergent, add the water
softener to the main detergent in the
left compartment.
Compartment for liquid care agent
(Softener, finisher, starch)
Important!
Fill the compartment at most to the MAX mark.
Fill any viscous agent up to the MAX mark. Dissolve powdery
starch.
Note:
It is normal for a small amount of water to be left
in the compartment for liquid care agent; this will not
affect the wash results.
Compartment for pre-wash/soaking detergent
Only for auxiliary programs
k
(PRE-WASH)/
q
(SOAKING)
or for water softener
