manualshive.com logo in svg

AEG OKO FAVORIT 60850 U, User Instructions, Page: 12 / 44

Share
Download
AEG OKO FAVORIT 60850 U User Instructions Download Page 12

Operating instructions

12

0 

1.

The dishwasher must be switched off.

2.

Press the INTENSIVE 70° and NORMAL 65° program buttons simultane-
ously and keep pressed.

3.

Press the ON/OFF switch. The LED indicators for the INTENSIVE 70° and 
NORMAL 65° program buttons flash.

4.

Press the NORMAL 65° program button again.
 The multi-display indicates the hardness setting.

5.

Pressing the NORMAL 65° programming button increases the hardness 
setting by 1. (Exception: Hardness setting 0 follows hardness setting 9).

6.

Once the hardness setting is correctly adjusted, press the ON/OFF 
switch. The hardness setting is then saved.

Filling with Special Salt for the Water Softener 

1 

Use only special salt for dishwashers. Never fill the salt container with 
any another type of salt (e.g. culinary salt) or dishwasher detergent. 
This would irreparably damage the water softener. 
Prior to filling with salt, please check each time that you really do have 
a packet of special salt in your hand. 

Fill with special salt: 

– Prior to using the dishwasher for the first time 
– When the 

SALT

 indicator on the control panel is illuminated. 

3 

If the water hardness in your area is less than 4 °d, you do not need to 
use special salt. 

Downloaded from DishWasher-Manual.com Manuals

Summary of Contents for OKO FAVORIT 60850 U













































Reviews:

No comments