manualshive.com logo in svg

AEG OKO FAVORIT 60750 VI, User Instructions, Page: 33 / 44

Share
Download
AEG OKO FAVORIT 60750 VI User Instructions Download Page 33

Installation and Connection Instructions

33

INSTALLATION AND CONNECTION 

INSTRUCTIONS 

Installing the Dishwasher 

• The dishwasher must be installed on a firm floor and adjusted to 

ensure that it is stable and level. 

• Using the spanner supplied, extend the threaded feet to compensate 

for any unevenness in the floor and to align the appliance to the sur-
rounding units. 

• The drain hose, inlet hose and mains cable must not be kinked or 

crushed when the dishwasher is in position. 

• In addition, the dishwasher must be firmly screwed to the work sur-

face or to the neighbouring units. This is essential to ensure the dish-
washer does not tip. 

Fitting the Furniture Door Panel

(see installation template supplied) 

3 

The door of the appliance can be fitted with a furniture door panel of 
the following dimensions:  

The installation template supplied is used to ease installation and to fix 
separate facing panels firmly in place. 

Width: 

591 mm – 594 mm 

Thickness: 

16 mm – 24 mm 

Height: 

max. 715 mm 

Weight: 

max. 10 kg 

Summary of Contents for OKO FAVORIT 60750 VI













































Reviews:

No comments