manualshive.com logo in svg

AEG OKO FAVORIT 50750, User Information, Page: 26 / 40

Share
Download
AEG OKO FAVORIT 50750 User Information Download Page 26

26

If the Dishwashing Results are not Satisfactory

The dishes are still dirty.

•

The wrong dishwashing cycle was selected.

•

The dishes were loaded is such a way that the dishwashing water did 
not reach all items. The baskets for the dishes must not be overload-
ed. 

•

The filters in the base of the washing compartment are dirty or incor-
rectly positioned.

•

Good quality detergent was not used, or too little was used.

•

In the case of scale deposits on the dishes: The dishwasher salt dis-
penser is empty or the water softening system has been incorrectly 
set.

•

The drain hose is incorrectly positioned.

The dishes do not dry and are not shining.

•

Poor quality rinse aid was used.

•

The rinse aid dispenser is empty.

There are smears, streaks, milky spots or a shiny bluish coating on 
glasses and dishes.

•

Lower rinse aid dosage.

There are dried water drops on the glasses and dishes.

•

Increase rinse aid dosage.

•

The detergent may be the cause. Contact the detergent manufactur-
er's customer advice centre.

Glass corrosion

•

Contact the detergent manufacturer's customer advice centre.

Summary of Contents for OKO FAVORIT 50750









































Reviews:

No comments