Specifications are subject to change without notice
V1.0
Specifications
(Column Installation)
30” Stai less Steel Micro a e Tri Kit
1.
Being careful not to scratch the microwave door, and move it back about 2 inches.
2.
Place the MWTK-76/9 into position. Use the 4 screws and screw them through the flanges into the side
gables.
3.
Pull the microwave forward, and align the front of the microwave with the front of the MWTK-76/9.
4.
To stop the microwave from sliding backwards whilst opening the door. It will be necessary to attach stops
behind the feet of the microwave
5.
Air must be able to flow from the microwave upwards and into the room, or roof space. Failure to comply will
oid the a ufacturer’s arra ty
on the microwave oven.
VOID CUT-OUT
