English
64
•
Switch on the display light:
To switch on the display light again permanently, press
any button briefly. Then keep button (8) pressed for approx. 3 seconds. The symbol
goes out.
Displaying diverse information
1. Switch the device to standby using the button (5).
2. Briefly press the
Y-M-D / C-F button (10) repeatedly. The following information is
displayed in succession:
Year Date Temperature Humidity
If the button is no longer pressed, the display will switch back to time after about 5 sec-
onds.
Toggling the display
The following can be shown alternatingly on the display:
Time Date Year Temperature Humidity
1. In order to activate this function, use the button (5) to switch the device to standby.
2. Keep the / button (7) pressed, until “
“ appears briefly on the display.
Switch off toggling:
To switch off Auto Toggle, keep the / button pressed again in
standby. “
“ appears briefly on the display.
NOTE:
Only the time is shown via the rotatable projector (16).
Toggle temperature display between °C (Celsius) and °F (Fahrenheit)
1. Switch the device to standby using the button (5).
2. Briefly press the
Y-M-D / C-F button (10) repeatedly until the temperature is dis-
played.
3. While the temperature is displayed, press the Y-M-D / C-F button for about 3 sec-
onds to switch between °C and °F.
Weather display (3)
The device does not just determine the room temperature and the humidity using the sen-
sor (22), but it can also create an approximate weather forecast for the next 12 to 24 hours.
However, the measurement can deviate from the actual weather conditions.
1. To do so, set up the device near an open window.
2. After about 3 hours, the device will have adjusted to the weather conditions.
Summary of Contents for MRC 4141 P
Page 113: ......
Page 114: ...Stand 05 14 MRC 4141 P ...
