English
32
Turn off the alarm sound
You have been woken and want to turn off the alarm? Press
the MODE button to turn off the alarm. It will sound again the
next day.
Deactivate the alarm function
Proceed as described under “Set the alarm time”. When
reaching step 5, deactivate the alarm function. The alarm icon
disappears.
Radio mode
Search for a radio station
1. Fully extend the telescopic antenna.
2. You have two options in order to search for a radio sta-
tion:
• Adjust the desired radio station using the UP or
DOWN button.
• Keep the UP or DOWN button pressed down for
a short while. The device will stop at the next radio
station.
3. In case of weak signal and noise, try to change the an-
tenna position for better reception.
Storing radio stations
1. Search for a radio station as described under “Search for
a radio station”.
2. Press and hold SET. The memory location starts flashing.
3. Using the UP/DOWN buttons select the memory location
where the radio station is to be stored.
4. Press the SET button again. The radio station will be
stored.
NOTE:
The stored radio stations are lost as soon as the power sup-
ply has been interrupted.
Select the preset radio station
1. Shortly press the SET button.
2. Use UP or DOWN to select a memory location.
3. Press SET to listen to the selected radio station.
Sleep timer
1. Press the MODE button during radio operation. The
display will show “60” (minutes).
2. Use UP or DOWN to select 30, 60, 90, or 120 minutes.
Selecting “- - -” will deactivate the function.
3. Confirm with MODE and the radio will turn off after the
pre-set time has expired.
NOTE:
Due to technical reasons, the activated function cannot be
displayed.
In order to cancel this function early, press the RADIO
button.
Playing back music files
There are two options to play back your own music files: with
cable or wireless via Bluetooth.
By cable
1. Connect an audio cable with a 3.5 mm stereo cinch plug
to the AUX IN connector (17).
2. Connect the other end of the cable with the external
audio device.
3. Set the switch (13) to “AUX IN
•
BLUETOOTH“.
4. Start playback of your external device. Use the control (8)
to adjust the volume.
5. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a com
-
fortable level.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (
I
ndustrial,
S
cientific and
M
edical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (
A
dvanced
A
udio
D
istribution
P
rofile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
In order to be able to perform remote control of the source,
the player must support the AVRCP profile (
A
udio
V
ideo
R
emote
C
ontrol
P
rofile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Set the switch (13) to “AUX IN
•
BLUETOOTH“.
The device will peep several times to indicate that the
device is in pairing mode.