• The related programme indicator
comes on.
• The indicator of Start/Pause -
Départ/Pause flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.
2.
If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set
option comes on.
If you set something
incorrect, the display shows
the message
Err
.
10.6
Starting a programme
without the delay start
Press button Start/Pause - Départ/Pause
to start the programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the door is
locked. The display show the indicator
.
The drain pump can operate
for a short time when the
appliance fills water.
10.7
Behaviour of the
appliance
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the
new time value.
10.8
Starting a programme
with the delay start
1.
Press button Zeitvorwahl - Départ
Différé again and again until the
display shows the number of minutes
or hours of delay.
The related indicator comes on.
2.
Press button Start/Pause - Départ/
Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Start/Pause - Départ/Pause
to start the appliance, you
can cancel or change the set
of the delay start.
10.9
Cancelling the delay start
To cancel the delay start:
1.
Press button Start/Pause - Départ/
Pause to set the appliance to pause.
The related indicator flashes.
2.
Press button Zeitvorwahl - Départ
Différé repeatedly until the display
shows .
3.
Press button Start/Pause - Départ/
Pause again to start the programme
immediately.
10.10
Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1.
Press button Start/Pause - Départ/
Pause.
The related indicator flashes.
2.
Change the function set.
3.
Press the button Start/Pause -
Départ/Pause again.
The programme continues.
ENGLISH
17
Summary of Contents for LP 5280
Page 22: ...3 4 1 2 5 1 2 6 7 8 1 2 9 1 2 www aeg com 22 ...
Page 50: ...1 1 2 2 2 1 1 3 4 1 2 5 1 2 6 7 8 1 2 www aeg com 50 ...
Page 58: ...www aeg com 58 ...
Page 59: ...DEUTSCH 59 ...