Page
22
8.2.8
Activate the ECO mode (Optional)
Your telephone is provided with a low-emission mode. ECO mode is activated, as soon as you place the handset
in the base station, the transmission power between handset and base station is reduced to the minimum. This
applies to base with single handset registration only. If more than one handset is registered to the base station, the
ECO mode will not function.
In Idle:
1. Repeat step 1 in section
8.2.1.
2. Press <OK> and <UP/DOWN> to select
ECO Mode.
3. Press <OK> to select
On
to activate ECO mode
.
4. Press <OK> to confirm.
8.2.9
Reset the base settings to default settings
After system reset, the phone will return to its original settings.
In Idle:
1. Repeat step 1 in section
8.2.1.
2. Press <OK> and <UP/DOWN> to select
System Reset.
3. Press <OK> to enter the 4-digit System PIN.
Note: 4-digit PIN is entered in ****. Once 4 digits are entered, the right soft key will become OK.
4. Press <OK> and <YES> to confirm resetting the base settings to default settings.
The base will restore to default settings and return to standby.
9
DEFAULT SETTINGS
Items
Default Values
Call List
All Calls or Unanswered Calls Only
All Calls
New Call Alert
On
Sound
External Ringer Melody
Melody 1
Internal Ringer Melody
Melody 2
Ringer Volume
Level 3
Silence
Off
Key Beep Tone
On
Confirmation Tone
On
Low Battery Tone
On
Out of Range Tone
On
Handset Settings
Direct Call
Off
Contrast
Level 5
Handset Rename
Empty
Wallpaper
Wallpaper 1
Colour Theme
Theme 1
Language
Country Dependent
Auto Answer
On
Base Settings
Ringer Melody
Melody 1
Ringer Volume
Level 2
Handset Priority
All Handsets
Dial Mode
Tone
Flash Time
Country Dependent
