AEG LFR71864B, User Manual

Page: 22 / 44

10.2 Acoustic signals
To deactivate the acoustic signals when
the programme is completed touch the
Stains/Prewash and the Plus Steam
buttons simultaneously for about 3
seconds.
The acoustic signals, they
continue operate when the
appliance has a malfunction.
10.3 Operating Hours
Counter
It is possible to visualise the total
operating time of the appliance in hours,
starting from the first switching on. This
value will count operating time of the
cycles (does not include pauses, delayed
start time). To visualise this value,
proceed as follows:
1. Switch the appliance on by pressing
On/Off button.
2. Turn the programme knob to the first
programme.
3. Press and hold the Stains/Prewash
and Plus Steam buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds,
the key combination activates and
deactivates the acoustic signals).
4. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. 1276 hours, the
display shows the text Hr for 2
seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens
and units).
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
10.4 Factory Reset
This function allows to restore the factory
default options. To activate this option
follow steps below:
1. Switch the appliance on by pressing
On/Off button.
2. Turn the programme knob to the third
programme.
3. Press and hold the Stains/Prewash
and Plus Steam buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds,
the key combination activates and
deactivates the acoustic signals).
4. The display will show for
about 5 seconds.
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
11. BEFORE FIRST USE
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour a small quantity of detergent
into the compartment marked .
4. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
12. DAILY USE
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
www.aeg.com 22