AEG LFR71862BC, User Manual, Page: 22 / 44

10. SETTINGS
10.1 Child Lock
With this option you can prevent children
from playing with the control panel.
• To activate/deactivate this option,
touch the Skvrny/Předpírka button
until the indicator comes on/goes
off on the display.
You can activate this option:
• After you touch the Start/Pauza
button: all the buttons and the
programme dial are deactivated
(except Zap./Vyp. button ).
• Before you touch the Start/Pauza
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
10.2 Acoustic signals
To deactivate the acoustic signals when
the programme is completed touch the
Skvrny/Předpírka and the Pára plus
buttons simultaneously for about 3
seconds.
The acoustic signals, they
continue operate when the
appliance has a malfunction.
10.3 Operating Hours
Counter
It is possible to visualise the total
operating time of the appliance in hours,
starting from the first switching on. This
value will count operating time of the
cycles (does not include pauses, delayed
start time). To visualise this value,
proceed as follows:
1. Switch the appliance on by pressing
Zap./Vyp. button.
2. Turn the programme knob to the first
programme.
3. Press and hold the Skvrny/Předpírka
and Pára plus buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds,
the key combination activates and
deactivates the acoustic signals).
4. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. 1276 hours, the
display shows the text Hr for 2
seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens
and units).
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
10.4 Factory Reset
This function allows to restore the factory
default options. To activate this option
follow steps below:
1. Switch the appliance on by pressing
Zap./Vyp. button.
2. Turn the programme knob to the third
programme.
3. Press and hold the Skvrny/Předpírka
and Pára plus buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds,
the key combination activates and
deactivates the acoustic signals).
4. The display will show for
about 5 seconds.
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
11. BEFORE FIRST USE
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
www.aeg.com 22