AEG LFM8C9612S, User Manual

Page: 17 / 44

The door stays locked. The drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
Touch Départ/Pause button: the
appliance performs the spinning
phase and drains the water.
• Activate the Extra silent option.
All spinning phases (intermediate spin
and final spin) are suppressed and
the programme ends with water in the
drum. This helps to reduce creasing.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are
available. In some programmes the
rinses are performed with more water.
The display shows the indicator .
The door stays locked. The drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
Touch the Départ/Pause button: the
appliance performs only the draining
phase.
The appliance empties the
water out automatically after
approximately 18 hours.
8.5 Taches/Prélavage
Press this button repeatedly to activate
one of the two options or both.
The relevant indicator goes on in the
display.
• Taches
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment . The stain remover
is pre-mixed and heated with
detergent in order to improve its
effectiveness.
This option can increase
the programme duration.
This option is not
available with a
temperature lower than
40 °C.
• Prélavage
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
This option can increase
the programme duration.
8.6 Rinçage Plus
With this option you can add up to 3
rinses accordingly to the selected
washing programmes.
Useful for people allergic to detergents
and in areas where the water is soft.
The indicator shows the selected
number of rinses.
This option increases the programme
duration.
If the Rinçage Plus is set as
a default option and you
select a compatible washing
programme, the display
shows
. In this case, by
pressing the Rinçage Plus
button , it is possible to add
just one rinse.
8.7 Vapeur Plus
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
The indicator flashes on the display
during steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows a zero , the indicator is
steady on and the indicator
starts
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
ENGLISH 17