AEG LF9A1612AC, User Manual

Page: 28 / 60

Program Program description
Machine Clean Maintenance cycle with hot water to clean and freshen the
drum and to remove residue that may cause odour. For the
best result use this cycle once a month. Before running this cy‐
cle, remove all items from the drum. Pour a cup of chlorine
bleach or a washing machine cleaner in the washing phase
compartment. DO NOT use both together.
After the drum cleaning, run a further rinse cy‐
cle with empty drum and no detergent to re‐
move any residue of bleach.
Run this program especially when the mes‐
sage Cleaning cycle recommended pops up. If
the cleaning program is postponed, the
message keeps on popping up during next
uses until it is run.
1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this program.
2) If you set a Steam program with dried laundry, at the end of the cycle the laundry can be humid.
Line dry the items for about 10 minutes.
3) Steam program doesn't remove particularly intense odour.
Program temperature, maximum spin speed and maximum load
Program Default temperature
Temperature range
Maximum spin speed
Spin speed range
Maximum load
OKOPower 30 °C
60 °C - 30 °C
1600 rpm
1600 rpm - 400 rpm
5 kg
ColourPro 30 °C
30 °C - Cold
1200 rpm
1200 rpm - 400 rpm
10 kg
Cottons 40 °C
95 °C - Cold
1600 rpm
1600 rpm - 400 rpm
10 kg
Cottons Eco
1)
40 °C
60 °C - 40 °C
1600 rpm
1600 rpm - 400 rpm
10 kg
Synthetics 40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Delicates 30 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Wool/Silk 40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
2 kg
Steam - - 1.5 kg
20min 3kg 30 °C
40 °C - 30 °C
1200 rpm
1200 rpm - 400 rpm
3 kg
www.aeg.com 28