Something not working?
If a problem occurs, you can try to solve it yourself following the
instructions below. If you call out an engineer when one of the follo-
wing problems occurs, or to repair a fault due to incorrect use, the call-
out will be charged even if requested within the guarantee period.
Problem
Possible cause
Remedy
The drier is not working
properly
Mains plug disconnected
Plug in mains plug
The “START/PAUSE-DEPART/PAUSE”
button has not been depressed.
press “START/PAUSE-DEPART/PAUSE”
button
No programme selected
Select programme
Loading door open
Close loading door
Fuse or residual current circuit
breaker in fuse box (domestic
installation) faulty
Check fuse or residual current circuit
breaker. Faults can be eliminated by
an electrical engineer
The drying results
are not satisfactory
Wrong programme selected
Select another (time) programme for
the next drying cycle
Lint filter blocked
Clean lint filter
Wrong filling quantity
Observe recommended filling quantity
Laundry not sufficiently dried
Pre-dry laundry sufficiently
Deposit on the drum inner surface-
or on the drum ribs
Clean drum inner surface and drum
ribs
25
Something not working?
125987510_UK_I.qxp 2007-03-30 13:15 Page 25