3.
Push the plastic connection back in
and place the water container back
into position.
4.
To continue the programme press
the
Start/Pause button.
10.3
Cleaning the condenser
If the symbol
Condenser
flashes on
the display, inspect the condenser and
its compartment. If it is dirty, clean it. Do
the check not less than once a 6 months.
WARNING!
Do not touch the metal
surface with bare hands. Risk
of injury. Wear protective
gloves. Clean carefully to
avoid damaging the metal
surface.
To inspect:
1.
Open the door. Pull the filter up.
2.
Open the condenser cover.
3.
Turn the lever to unlock the
condenser lid.
4.
Lower the condenser lid.
5.
If necessary, remove the fluff from
the condenser and its compartment.
You can use a wet cloth and/or a
vacuum cleaner with a brush
attachment.
6.
Close the condenser lid.
7.
Turn the lever until it clicks into
position.
8.
Put the filter back.
10.4
Cleaning the drum
WARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum lifters. Dry the cleaned surfaces
with a soft cloth.
www.aeg.com
18
