21
Drying results unsatis-
factory.
Wrong programme selected.
Select a different programme
the next time you dry (see
“Overview of programmes”
section).
Lint filter clogged.
Clean lint filter.
Heat exchanger clogged
with lint.
Clean heat exchanger.
Incorrect volume of laundry.
Observe recommended load-
ing volumes.
Ventilation slots in base area
covered up.
Uncover ventilation slots in
base area.
Residue on inside surface of
drum or drum ribs.
Clean inside surface of drum
and drum ribs.
Make an adjustment using the
INTENSITY (RESTFEUCHTE)
function (see chapter ”Drying,
Selecting additional func-
tions”).
Loading door does not
open with DOOR (TÜR)
button.
Mains plug disconnected.
Plug in at mains socket.
Programme selector in OFF
(AUS) position.
Set programme. Loading door
can be opened at any time by
exerting pressure on the door.
Loading door does not
close.
Fine strainer not in place
and/or large mesh filter not
locked in place.
Install fine strainer and/or
snap large mesh filter into
place.
When a button is
pressed,
Err
appears
in the multi-display.
Washing protection. After
the start of the programme,
the option can no longer be
set.
Turn the programme knob to
OFF (AUS). Set the programme
again.
Drum light does not
work.
Programme selector in OFF
(AUS) position.
Turn programme selector to
LIGHT (BELEUCHTUNG) or to
any programme.
Defective light bulb.
Replace light bulb (see next
section).
PROGRAMME TIME
(LAUFZEIT) display
changes erratically or
stays unchanged for a
long time.
Programme time is correct-
ed automatically depending
on type and volume of
laundry and level of damp-
ness.
Automatic process; this is not
a machine fault.
Problem
Possible cause
Remedy
