Problem
1)
Possible cause
Remedy
Not possible to
change the pro-
gram or option.
After cycle start it is not possible to
change the program or option.
Turn the tumble dryer off and on.
Change the program or option as
required.
Not possible to
select an option.
Acoustic signal
is emitted.
The option you tried to select is
not available for the selected pro-
gram.
Turn the tumble dryer off and on.
Change the program or option as
required.
Unexpected du-
ration time on
the display.
The drying duration is calculated
according to load size and damp-
ness.
This is automated — the appliance
is working correctly.
Program inac-
tive.
The water container is full.
Drain the water container, push
the
Start/Pause button.
3)
Drying cycle too
short.
Load size is small.
Select time program. The time val-
ue must be related to the load. To
dry 1 item or a small amount of
laundry we recommend short dry-
ing times.
The laundry is too dry.
Select time program or higher dry-
ness level (e.g.
extra dry)
Drying cycle too
long
6)
The filter is clogged.
Clean the filter.
The load is too large.
Do not exceed the maximum load
size.
The laundry was not spun suffi-
ciently.
Spin the laundry well.
Too low or too high room temper-
ature - this is not the appliance
malfunction.
Ensure a room temperature higher
than +5°C and lower than +35°C.
Optimal room temperature to ach-
ieve best drying results is between
19°-24°C.
1)
If there is an error message on the display (e.g.
E51
): Turn the tumble dryer off and on. Select a new
program. Push the Start/Pause button. If the appliance does not operate contact the service centre and
provide the error code.
2)
Follow the program description — see PROGRAMS chapter
3)
See chapter CARE AND CLEANING
4)
Only dryers with Dryness option
5)
See HINTS AND TIPS chapter
6)
Note: After a maximum of 5 hours the drying cycle ends automatically.
ENGLISH
19
