– anti-crease phase and when phase starts or ends
– cycle interruption by a warning
– alarm
To activate it:
1. Choose the drying programme.
2. Press BUZZER button - the led above is on.
To deselect function press again BUZZER button.
Led above is off.
TIME function
To select the programme duration after setting the TIME programme. You can select a
programme duration from 10 mins to 3 hrs in 10-minute steps.
1. Turn the programme knob to the TIME programme. The blinking 10' appears in the
display. (corresponding to the COOLING programme).
2. Press the TIME button repeatedly until the
desired programme duration is shown in
the display, e.g. 20 for a programme of 20
minutes.
If the programme duration is not selected, the
duration is automatically set to 10 mins.
DELAY START function
With the DELAY START button, you can delay the start of a programme by between
30 minutes (30') and a maximum of 20 hours (20h).
1. Select the programme and additional functions if necessary.
2. Press the DELAY START button as many
times as necessary until the required start
delay appears on the display, e.g. 12h if
the programme is to be started in 12
hours.
If the display is showing 20h and you
press the button again, the time delay will
be cancelled. The display will show 0' and
then the duration of the selected pro
-
gramme.
12
Daily use
