background image

Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture

IPX4

Water supply pressure

1)

Minimum
Maximum

0,5 bar (0,05 MPa)
8 bar (0,8 MPa)

Water supply 

2)

Cold water

Maximum Load

Cotton

8 kg

Energy Efficiency Class

A+++

Spin Speed

Maximum

1400 rpm

1) 

The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot

connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your
domestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.

2) 

Connect the water inlet hose to a water tap with a 3/4'' thread.

15. 

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol 

.

Put the packaging in relevant containers

to recycle it. Help protect the

environment and human health by

recycling waste of electrical and

electronic appliances. Do not dispose of

appliances marked with the symbol 

with the household waste. Return the

product to your local recycling facility or

contact your municipal office.

*

www.aeg.com

24

Summary of Contents for LAVAMAT68480FL





























Reviews: