18
Run wash cycle
Brief instructions
A washing cycle proceeds in the following steps:
0
Open the door, put in the washing.
0
Shut the door.
0
Add washing powder/conditioner.
0
Set the correct washing program.
Set the program selector to the desired washing program.
Set the temperature selector to the desired temperature.
0
Press the EASY-CARES button if required.
0
Pull out program selector.
The washing program starts automatically after six seconds.
0
Reduce the final spin speed or select RINSE HOLD if required.
You can alter this setting and the temperature during the entire washing
cycle.
After the washing program has been completed:
3
The door remains locked for safety reasons for 1-2 minutes after the
end of program.
Important!
If the washing cycle ended with Rinse Hold, before opening
the door, carry out a PUMP OUT, SPIN or SHORT SPIN.
0
Wait 1-2 minutes until the door unlocks before opening.
0
Open the door, remove the washing.
0
Push in the program selector. This switches the washing machine off.
Loading the washing
0
Sort the washing according to the type.
3
For information on correct preparation of the
washing see "Types of washing and care symbols".
0
Open the door: pull the handle of the door.
0
Load the washing.
3
See the "Program tables" for the maximum load.
0
Firmly shut the door.
Caution!
When shutting the door be careful not to catch any pieces of
laundry! The fabric and machine could be damaged.
