37
Care and cleaningChapter
6.
When no more water comes out,
unscrew the pump and remove it.
Always keep a rag nearby to dry up
spillage of water when removing the
pump.
7.
Remove any objects from the pump
impeller by rotating it.
8.
Put the cap back on the emergency
emptying hose and place the latter
back in its seat.
9.
Screw the pump fully in.
10.
Close the pump door.
Warning!
When the appliance is in use and
depending on the programme selected
there can be hot water in the pump. Never
remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When
replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.
Water inlet filter
If you notice that the machine is taking longer
to fill, check that the filter in the water inlet
hose is not blocked.
1.
Turn off the water tap.
2.
Unscrew the hose from the tap.
3.
Clean the filter in the hose with a stiff
brush.
4.
Screw the hose back onto the tap.
132969470 EN.qxd 21/09/2007 15:55 Pagina 37
