background image

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap

water containing iron.
Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or

iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2. Run a washing cycle without any washing to clean off any cleaning agent residues.

Programme: Short Cotton Programme at maximum temperature and add approx. 1/4

measuring cup of detergent.

Door seal

Check from time to time the door seal and objects

that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if:

• the appliance does not empty and/or spin;

• the appliance makes an unusual noise during draining due to objects such as safety pins,

coins etc. blocking the pump;

• a problem with water draining is detected (see chapter “What to do if...” for more de

-

tails).

WARNING!

Before opening the pump door, switch the appliance off remove the mains plug from the

socket.

Proceed as follows:

1.

Unplug the appliance.

2.

If necessary wait until the water has cooled down.

3.

Open the pump door.

4.

Pull flap forward to remove.

5.

Place a container close to the pump to

collect any spillage.

Care and cleaning

23

Summary of Contents for LAVAMAT 76650 A3









































Reviews: