background image

CONSUMPTION VALUES

Programme

1)

Energy consumption

(kWh)

2)

Water consumption

(litre)

2)

White Cottons 95 °C

2.5

62

Cottons 60 °C

1.7

63

Cottons 40 °C

0.97

62

Synthetics 40 °C

0.55

51

Delicates 40 °C

0.54

67

Wool/ Handwash 30 °C

0.3

64

1) Refer to the display for the programme time.

2) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the

type of laundry, on the temperature of the water supply and on the ambient temperature.

Standard programmes for the Energy Label consumption values

The cotton 60 °C economy and 40–60 MIX are the standard cotton programmes for nor-

mally soiled cotton laundry. They are suitable to clean normally soiled cotton laundry and

they are the most efficient programmes in terms of combined energy and water consump-

tion for washing that type of cotton laundry.

They agree with EN60456.
The actual water temperature may differ from the declared cycle temperature.

INSTALLATION

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever

has to be transported again.
1.

After removing all the packaging, care-

fully lay machine on it’s back to remove

the polystyrene base from the bottom.

32

Consumption values

Summary of Contents for LAVAMAT 74950M3









































Reviews: