50
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
Using a spanner,
unscrew and remove
the 2 rear bottom
screws. Slide out the
2 plastic pins. Lay
the machine on its
back, taking care not
to squash the hoses.
This can be avoided
by placing one of
the corner packing pieces between the
machine and the floor.
Remove the polystyrene block from the
bottom of the machine and release the
two plastic bags.
Carefully slide out the left-hand bag
removing it towards the right and then
downwards.
Slide out the right-hand bag removing it towards the left and then
upwards.
The bottom cover
plate, which can
be found inside
the machine with
the instruction
book, will now
need to be fitted.
Hook the bottom
of the plate 'A',
into position first. Then push the other end of the plate into position.
Important!
You can find more detailed instructions regarding the bottom cover assemblig
in its relative bag.
P1129
P1124
2
3
1
P1204
2
1
A
P1205
P0001
132988621.qxd 11/01/2005 17:13 Pagina 50
