Starting the programme
1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the
programme will start at the end of the count-
down.
If the door light
is red and flashing at the start of the pro-
gramme it indicates that the door is open. Close the door and press
the START/PAUSE button again.
If the delay start option has been selected
, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to modify or cancel the
delay time.
• Load other laundry:
press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Modify or cancel the delay time:
press the START/PAUSE button.
Press the DELAY START button
until the time required
appears on the display, or
0
h, if you wish to cancel it. Press the
START/ PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on. After the machine has started, only the running
phase pilot light stays on.
Display
The time to the end of the programme decreases minute
by minute and appears on the display.
At the end of the programme
The machine stops automatically. A zero appears on the display. An
acoustic signal is clearly audible. The END
light comes on in
the programme progress display.
If the light
(OVERDOSAGE) comes on it indicates that too
much detergent has been used. At the next wash carefully follow the
detergent manufacturer’s instructions. Measure out detergent accord-
28
How to wash
MAIN WASH
EXTRA RINSE +
RINSES
END
OVERDOSAGE
SPIN
DRYING
PREWASH
1 5 0
132994940.qxd 9/11/02 3:27 PM Pagina 28 (Nero/Process Black pellicola)
