AEG L9WEE06W, User Manual

Page: 31 / 52

To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pauze - Départ/
Pause to start the programme. The
PROSENSE estimation starts.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
11.3 Washing and Timed
Drying
1. Tap on the button Droogtijd -
Minuterie repeatedly to set the
desired time value (see the "Timed
drying" table the "Programmes"
chapter). The drying level indicator
goes off and the indicator
comes
on.
The minimum timed drying is 10 minutes.
Each time you tap on this button the
time value increases by 5 minutes. The
display shows the set new time value.
2.
Touch the Start/Pauze - Départ/
Pause to start the programme. The
ProSense estimation starts.
In the display the door locked
indicator comes on and the indicator of
the running phase starts flashing.
The display also shows the remaining
programme time.
11.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• In the display comes on.
• The indicator of button Start/Pauze -
Départ/Pause goes off. The door
locked
goes off
• Press the button Aan/Uit - Marche
Arrêt for some seconds to deactivate
the appliance.
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
1. Remove the laundry from the
appliance.
2.
Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
The indicator appears on
the display to remind you to
clean the air filter (refer to
'Cleaning the air filters' in
'Care and cleaning' chapter).
12. DAILY USE - DRYING ONLY
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
12.1
Preparation to drying
1. Press the Aan/Uit - Marche Arrêt
button for some seconds to activate
the appliance.
With a drying-only
programme the display does
not show the maximum load
and the ProSense estimation
is deactivated.
2. Load the laundry one item at a time.
3. Turn the programme dial to the
programme suitable for the items to
dry.
4. Tap on the Modus - Mode button
twice to exclude washing and
perform drying only. The Drogen -
Séchage indicator is on. The
ENGLISH 31