AEG L9FEC49S User Manual Download Page 30

• If you have set  , the appliance

only drains the water.

The option indicator 

 or   goes out,

while the indicator   flashes and then

goes off.

3.

When the programme is completed
and the door locked indicator 

goes off, you can open the door.

4.

Press the On/Off button a few

seconds to deactivate the appliance.

In any case, the appliance

empties the water out

automatically after

approximately 18 hours.

11.14 

Stand-by option

The Stand-by function automatically

deactivates the appliance to decrease

the energy consumption when:

• You do not use the appliance for 5

minutes before you touch the Start/

Pause button.

Press the button On/Off to activate

the appliance again.

• After 5 minutes from the end of the

washing programme

Press the On/Off button to activate

the appliance again.

The display shows the end of the last

set programme.

Turn the programme dial to set a new

cycle.

If you set a programme or an

option that ends with water

in the drum, the Stand-by

function 

doesn't deactivate

the appliance to remind you

to drain the water.

12. 

HINTS AND TIPS

WARNING!

Refer to Safety chapters.

12.1 

The laundry load

• Divide the laundry into: white,

coloured, synthetics, delicates and

wool.

• Follow the washing instructions on the

laundry care labels.

• Do not wash white and coloured

items together.

• Some coloured items can discolour

with the first wash. We recommend

that you wash them separately for the

first couple of times.

• Button up pillowcases, close zippers,

hooks and poppers. Tie up belts.

• Empty pockets and unfold.

• Turn multilayered fabrics, wool and

items with printed illustrations inside

out.

• Pre-treat tough stains.

• Wash heavy soil stains with a special

detergent.

• Be careful with curtains. Remove the

hooks and put the curtains in a

washing bag or pillowcase.

• Do not wash laundry without hems or

with cuts. Use a washing bag to wash

small and/or delicate items (e.g.

underwired bras, belts, tights, etc. ).

• A very small load can cause balance

problems with the spin phase leading

to excessive vibration. If this occurs:

a.

interrupt the programme and

open the door (refer to

"Opening the door when a

programme or the delay start

operates");

b.

manually redistribute the load so

that the items are spaced evenly

around the tub;

c.

press the Start/Pause button. The

spin phase continues.

12.2 

Stubborn stains

For some stains, water and detergent is

not sufficient.
We recommend that you pre-treat these

stains before you put the items in the

appliance.
Special stain removers are available. Use

the special stain remover that is

applicable to the type of stain and fabric.

www.aeg.com

30

Summary of Contents for L9FEC49S













































Reviews: