AEG L8WBE68SI User Manual Download

Page: 34 / 52

When the programme is completed
and the door locked indicator

goes off, you can open the door.

Press the On/Off button for a few

seconds to deactivate the appliance.

10.14

Stand-by function

The Stand-by function automatically

deactivates the appliance to reduce the

energy consumption when:
• You do not use the appliance for 5

minutes when no programme is

running.

Press the button On/Off to activate

the appliance again.

• 5 minutes after the end of the

washing programme.

Press the On/Off button to activate

the appliance again.

The display shows the end of the last

programme.

Turn the programme dial to set a new

cycle.

If the dial is rotated to the "Reset"
position , the appliance automatically

turns off in 30 seconds.

If you set a programme or an

option that ends with water

in the drum, the Stand-by

function

doesn't deactivate

the appliance to remind you

to drain the water.

11.

DAILY USE - WASHING & DRYING

WARNING!

Refer to Safety chapters.

This appliance is an

automatic washer dryer.

11.1

Complete wash&dry

programme
Automatic Non-Stop

programme or programmes

Depending on the model, the appliance

may be equipped with one or more

NonStop 60min programmes, automatic

wash&dry programmes where it is not

necessary to set the Mode - Dry.
Proceed as follows:

After loading laundry and detergent,

press the On/Off button for some

seconds to activate the appliance.

Set the NonStop 60min programme

by means of the programme dial.
The indicators

and

appear on

the display.

Touch the Start/Pause

button to

start the programme.

Non-automatic wash&dry

programmes

In some washing programmes, you can

combine Wash and Mode - Dry for

running a complete wash&dry

programme.
Proceed as follows:

Press the On/Off button for some

seconds to activate the appliance.

Load the laundry one item at a time.

Put the detergent and the additives

in the appropriate compartment.

Turn the programme dial to the

washing programme. The appliance

defaults to the washing only mode

and the indicator of the Wash button

is on. The display shows the default

temperature and spin. If necessary,

change them according to your

laundry. The display also shows the

maximum recommended load for

washing phase.

Set the desired options, if there are

available.

Tap on the Mode - Dry button to

activate also the drying function.

Both indicators of the Wash and

Mode - Dry buttons are on. The
indicators

and appear on the

display. The display also shows the

www.aeg.com

Summary of Contents for L8WBE68SI





















































Search results

Summary of Contents for L8WBE68SI

Reviews:

Related manuals for L8WBE68SI

Brands by name

Popular brands

AEG L8WBE68SI, User Manual

Search results

Summary of Contents for L8WBE68SI

Reviews:

Related manuals for L8WBE68SI

Brands by name

Popular brands