AEG L8TFI735E2, User Manual

Page: 25 / 40

11.14 Opening the Lid when
the delay start is active
While the delay start operates, the
appliance lid is locked.
To open the appliance lid:
1. Press button Käynnistä/Tauko.
The indicator goes off.
2. Open the appliance lid.
3. Close the lid and press button
Käynnistä/Tauko.
The delay start continues.
11.15 End of cycle
When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).
In the display comes on and the lid
locked indicator
goes off.
The indicator of Käynnistä/Tauko button
goes off.
1. Press button Päällä/Pois to
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door ajar, to prevent mildew
and odours
11.16 Draining water out after
end of cycle
The washing programme is
completed, but there is water in the
drum:
The drum turns regularly to prevent the
creases in the laundry.
The lid lock indicator is on. The lid
stays locked.
You must drain the water to open the lid:
1. If necessary, decrease the spin
speed.
2. Press the Käynnistä/Tauko button.
The appliance drains the water and
spins.
3. When the programme is completed
and the door lock indicator goes
off, you can open the door .
4. Press Päällä/Pois some seconds to
deactivate the appliance.
The appliance drains and
spins automatically after
approximately18 hours.
11.17 AUTO Stand-by option
The AUTO Stand-by function
automatically deactivates the appliance
to decrease the energy consumption
when:
• You do not use the appliance for 5
minutes before you press Käynnistä/
Tauko button.
Press the button Päällä/Pois to
activate the appliance again.
• After 5 minutes from the end of the
washing programme
Press the button Päällä/Pois to
activate the appliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a
new cycle.
If you set a programme or an
option that ends with water
in the drum, the AUTO
Stand-by function doesn't
deactivate the appliance to
remind you to drain the
water.
12. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
ENGLISH 25