the indicator
comes on/goes off
on the display.
You can activate this option:
• After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except Ein /Aus button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
10.2
Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To
deactivate/activate
the acoustic
signals when the programme is
completed, touch the Extra Spülen and
the Anti-Allergie buttons simultaneously
for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
10.3
Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a
programme where it is selectable.
• To
activate/deactivate
this option
touch the Extra Spülen button and the
Option button simultaneously the
relevant indicator
comes on/goes off
.
This option adds two rinses and the
display shows
.
10.4
Soft Plus
Set the Soft Plus option to optimise the
fabric softener distribution and improve
the fabric softness.
It is suggested when you use the fabric
softener.
This option increases slightly
the programme duration.
To
activate/deactivate
this option touch
the Temp. button and the U.Min. button
simultaneously until the indicator
comes on/goes off
above the
indicator.
11.
DAILY USE
WARNING!
Refer to Safety chapters.
11.1
Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme BEFORE
you put the laundry in the
drum.
11.2
Before activating the
appliance
1.
Make sure that the mains plug is
connected to the mains socket.
2.
Make sure that the water tap is open.
11.3
Activating the appliance
and setting a programme
1.
Press button Ein /Aus for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
cotton programme.
The indicator of Start/Pause button
flashes.
ENGLISH
23
