manualshive.com logo in svg

AEG L8FEN96CQ, User Manual

Share
Download
AEG L8FEN96CQ User Manual Download Page 52

The information given in the chart above is compliant with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC and EU commission regulation No.
1275/2008.

15. 

TECHNICAL DATA

Dimension

Width/ Height/ Depth/
Total depth

600 mm/ 850 mm/ 630 mm/ 660 mm

Electrical connection

Voltage
Overall power
Fuse
Frequency

230 V
2200 W
10 A
50 Hz

Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture

IPX4

Water supply pressure

Minimum
Maximum

0.5 bar (0.05 MPa)
8 bar (0.8 MPa)

Water supply 

1)

Cold water

Maximum Load

Cotton

9 kg

Energy Efficiency Class

A+++

Spin Speed

Maximum spin speed

1551 rpm

1) 

Connect the water inlet hose to a water tap with a 3/4'' thread.

16. 

ACCESSORIES

16.1 Available in

www.aeg.com/shop or from

authorised dealer

Only appropriate

accessories approved by

AEG ensure the safety

standards of the appliance. If

unapproved parts are used,

any claims will be

invalidated.

16.2 

Fixing plate kit

If you install the appliance on a plinth,

secure the appliance with the fixing

plates.
Read carefully the instructions supplied

with the accessory.

16.3 

Stacking kit

The tumble dryer can be stacked on the

top of the washing machine 

only by

www.aeg.com

52

Summary of Contents for L8FEN96CQ

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands