background image

CAUTION!

Do not use alcohol, solvents

or chemical products.

CAUTION!

Do not clean the metal

surfaces with chlorine-based

detergent.

13.4 Descaling

If the water hardness in your

area is high or moderate, we

recommend that you use a

water descaling product for

washing machines.

Regularly examine the drum to check for

limescale.
The regular detergents already contain

water softening agents, but we

recommend to run a cycle with empty

drum and a descaling product

occasionally.

Always follow the

instructions that you find on

the packaging of the

product.

13.5 Maintenance wash

The repeated and prolonged use of low

temperature and short programmes can

cause detergent deposits, fluff residues,

bacterial growth and biofilm formation

inside the drum and the tub. This could

generate bad odours and mildew.
To eliminate these deposits and

hygienize the inner part of the appliance,

run a maintenance wash at least once a

month:
1. Remove all laundry from the drum.

2. Deactivate AutoDose function for

detergent and softener.

3. Add manually small quantity of

powder detergent or a specific

product and run a cotton programme

with the highest temperature.

13.6 Door seal

This appliance is designed with a self

cleaning draining system, allowing light

fluff fibers that fall off the clothes to be

drained out with the water. Regularly

examine the seal. Coins, buttons, other

small items can be recovered at the end

of the cycle.

Clean it when needed, using ammonia

cream cleanser agent without scratching

the seal surface.

Always obey the instructions

that you find on the

packaging of the product.

13.7 Cleaning the drum

Regularly examine the drum to prevent

unwanted deposits.
Rust deposits in the drum may occur due

to rusting foreign body in the washing or

tap water containing iron
Clean the drum with special products for

stainless steel.

Always follow the

instructions that you find on

the packaging of the

product.

Do not clean the drum with

acidic descaling products,

scouring products containing

chlorine or iron or steel wool.

For a thorough clean:

1. Remove all laundry from the drum.

2. Deactivate AutoDose function for

detergent and softener.

3. Run a Katoen programme with the

highest temperature.

4. Add a manually small quantity of

powder detergent or a specific

product into the empty drum, in order

to rinse out any left residues.

www.aeg.com

42

Summary of Contents for L8FEN96CAD





























































Reviews: