AEG L8FE86498, User Manual

Page: 21 / 40

9. SETTINGS
9.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To
activate/deactivate this option,
touch the Flecken/Vorw. and the Extra
Spülen buttons simultaneously until
the indicator
comes on/goes off
on the display.
You can activate this option:
• After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except Ein /Aus button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To
deactivate/activate
the acoustic
signals, touch the Extra Spülen and the
Zeitvorwahl buttons simultaneously for
about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To
activate/deactivate this option
touch the Extra Spülen button and the
Option button simultaneously the
relevant indicator comes on/goes off .
This option adds two rinses and the
display shows
.
9.4 Soft Plus
Set the Soft Plus option to optimise the
fabric softener distribution and improve
the fabric softness.
This option increases slightly
the programme duration.
To activate/deactivate this option touch
the Temp. button and the U.Min. button
simultaneously until the indicator
comes on/goes off above the
indicator.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1
Activating the appliance
1.
Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Ein /Aus button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
10.2 Loading the laundry
1. Open the appliance door.
ENGLISH 21